Live Feeds - 6,899
Total Listeners - 30,406
Top Listeners - Cleveland Police and Me... (311)
 
Browse Feeds Top Feeds New Feeds Official Feeds Alert Feeds Archives

Cal Fire Working Incidents - TCU


  
US > California > Multiple Counties

Listen Feed Genre Listeners Player Selection Links Status
 Cal Fire Working Incidents - TCU

Winter monitoring programmed: Calaveras County Road Dept, Yosemite NP (SR 120 area) and the usual fire channels for Calaveras and Toulumne Counties.
Public Safety
1   Online

       
 


Feed Notes

CAL FIRE WORKING INCIDENT FEED FOR AEU & TCU.

Transitioning towards winter radio ops.  Have added Calaveras County Roads mobile frequency, CHP Stockton mobile frequency, both of which will be heard along the highway 4 coordidor from Murphys to Dorrington.

 For Cal Fire there will be plenty of aviation monitored: Air Tactics, Air-Ground, and Air-Air.  Also monitored are Cal Fire Command 12, Air Tactics and  Air-Ground for Amador, Calaveras & Toulumne Counties programmed in as well as Calaveras County & Toulumne County Command channels.  For USFS you will hear Stanislaus (STF) National Forest Fire Net (170.5) as well as Air Tactics, Air-Ground, Flight Following, and Guard channels.  To round things off, VFIRE 21,22 & 23 monitored as well as CALCORD and aviation emergency freqs 121.5 and 243.0.  I added Alpine County (153.8), which is both sheriff and fire, for coverage in the Bear Valley/Lake Alpine area.

You will NOT hear any dispatch traffic....no tones...no routine medical calls...no law enforecement traffic.

Suggestions or comments welcomed via email:  bluebag@yahoo.com

Programmed frequencies:

151.28  159.3675  151.31  151.22  151.2875  151.37  151.2425  151.6625  151.13  122.925  168.625  168.65  135.575  123.975  168.75  170.5

167.5  168.6375  169.1125  167.7  168.8375  167.375  121.5  243.0  172.775  168.5625  156.075  151.355  151.265  154.28  154.265  154.295

167.9  255.4  167.9  345.0  153.80

 New modem and router installed on August 12, 2019.  On August 28th Comcast paid a visit and reset the cable levels.  Hopefully this fixed the on/off issue with the feed.